BENLEE (Menu)
View Cart 

American Roll-Off / PALFINGER 10" Cable Sheave – 2" Bore.

MANUFACTURER: American Roll-Off Palfinger     SKU: CA018

🚚 Orders placed by 2:00 PM ET (Mon–Fri) ship the same day


10" Cable Sheave with 2" Bore for American Roll-Off / PALFINGER Hoists

Replace a worn or damaged cable pulley on your roll-off equipment with this 10-inch cable sheave with a 2-inch bore, offered as a replacement for compatible American Roll-Off / PALFINGER cable hoists.

Designed for use with 7/8-inch wire rope, this sheave helps guide the hoist cable through the pulley arrangement during roll-off container loading and unloading.

The sheave features a 10" outside diameter, 2" inside diameter, and grease grooves for lubrication distribution at the rotating contact surfaces. It is commonly used in T-plate or slide-plate sheave arrangements on compatible roll-off hoists and trailers.

This replacement sheave is associated with American Roll-Off part reference 40-140B and is available from Roll Off Truck & Trailer Parts under SKU CA018.

Features & Benefits

  • American Roll-Off / PALFINGER Replacement Application: Intended for compatible roll-off cable hoist equipment.

  • 10" Outside Diameter: Replacement sheave size for matching pulley assemblies.

  • 2" Inside Diameter: Designed for a compatible 2-inch shaft or pin arrangement.

  • 7/8" Wire Rope Compatibility: Grooved for use with matching roll-off hoist cable.

  • Grease Grooves: Help distribute lubricant across the intended bearing surfaces when properly maintained.

  • T-Plate / Slide-Plate Application: Suitable for compatible roll-off hoist sheave mounting arrangements.

  • Replacement Reference 40-140B: Helps identify the required American Roll-Off sheave.

  • Replacement SKU CA018: Available online from Roll Off Truck & Trailer Parts.

Product Specifications

Specification Details
Equipment Brand American Roll-Off / PALFINGER
Product Type Roll-Off Cable Sheave / Pulley
Cross-Reference Part Number 40-140B
Store SKU CA018
Outside Diameter (OD) 10 inches
Inside Diameter (ID) / Bore 2 inches
Wire Rope Size 7/8 inch
Lubrication Feature Grease Grooves
Mounting Application Compatible T-Plate / Slide-Plate Assemblies
Equipment Application Roll-Off Cable Hoists and Compatible Trailers

Replacement Cable Sheave for American Roll-Off Hoists

American Roll-Off / PALFINGER cable hoists rely on sheaves to guide wire rope through the lifting arrangement.

During operation, the hoist cable travels along the sheave groove as the container is loaded or unloaded. Properly functioning sheaves help maintain cable alignment and support normal hoist operation.

This 10" diameter x 2" bore sheave is intended for compatible equipment requiring a pulley with matching dimensions and a groove for 7/8" wire rope.

Common applications include:

  • American Roll-Off / PALFINGER cable hoists

  • Roll-off truck cable pulley replacement

  • T-plate and slide-plate sheave assemblies

  • Commercial roll-off container loading equipment

  • Compatible roll-off trailer sheave systems

  • Waste-hauling and recycling equipment maintenance

  • Replacement of worn or damaged hoist cable pulleys

Why Replace a Worn Roll-Off Cable Sheave?

Cable sheaves are subjected to repeated rotation, wire rope contact, and changing cable loads during normal hoist operation.

Over time, the sheave groove, center bore, or contact surfaces can develop wear that interferes with proper cable movement.

Common signs that a sheave needs inspection or replacement include:

  • Excessive wear or uneven cable groove surfaces

  • Cracks, chips, or damage to the sheave

  • Binding or resistance when the sheave rotates

  • Excessive movement around the mounting pin

  • Corrosion or damaged bearing surfaces

  • Abnormal cable tracking or accelerated wire rope wear

Replacing a damaged sheave can help maintain proper wire rope guidance, reduce unnecessary friction, and prevent additional wear to the hoist cable and related components.

How to Measure Your Replacement Cable Sheave

Before ordering, compare your existing sheave with the following specifications:

  1. Outside Diameter: Measure across the outer edges of the sheave. This replacement measures 10 inches.

  2. Inside Diameter: Measure the center bore. This sheave has a 2-inch inside diameter.

  3. Cable Size: Confirm your equipment uses 7/8-inch wire rope.

  4. Sheave Width: Compare the overall width and groove dimensions with your existing sheave.

  5. Mounting Configuration: Verify the pin, shaft, spacer, and T-plate or slide-plate arrangement.

  6. Replacement Part Reference: Check whether your equipment requires American Roll-Off 40-140B or a verified equivalent.

Important: A matching outside diameter alone does not guarantee compatibility. Always verify bore diameter, cable groove, sheave width, and mounting requirements.

Frequently Asked Questions

What size is this American Roll-Off replacement sheave?

This sheave has a 10-inch outside diameter and a 2-inch inside diameter.

What size cable does this sheave use?

The sheave is listed for use with 7/8-inch wire rope.

What is the replacement part number?

The listed American Roll-Off cross-reference is 40-140B. Our store SKU is CA018.

Does this sheave have grease grooves?

Yes. The sheave is listed with grease grooves that help distribute lubricant at the intended contact surfaces.

Does this sheave include a mounting pin?

The product is listed as a replacement sheave. Mounting pin inclusion has not been confirmed. Verify the supplied components before ordering.

Will this fit every American Roll-Off / PALFINGER hoist?

No. Different hoists may use sheaves with different bore diameters, outside diameters, cable grooves, and mounting arrangements. Always verify the original specifications.

Is this the same as a 10" sheave with a 3" bore?

No. A 10" sheave with a 3" bore requires a different mounting shaft arrangement. A 2" bore sheave and a 3" bore sheave are not directly interchangeable.

Order Your American Roll-Off Replacement Cable Sheave

Keep your roll-off equipment in service with replacement cable sheaves, pulleys, pins, and hoist components from Roll Off Truck & Trailer Parts.

This 10" outside diameter x 2" inside diameter cable sheave (SKU CA018) is a replacement option for compatible American Roll-Off / PALFINGER hoist equipment using 7/8" wire rope.

Order your American Roll-Off 10" cable sheave online today!

Fitment Note: American Roll-Off / PALFINGER names and part reference 40-140B are used for equipment identification and replacement compatibility. This listing does not establish genuine PALFINGER OEM status. Verify all dimensions and mounting requirements before ordering.

SKU:


We Also Recommend

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)