Truck-Lite 30264Y 2" Round Amber LED ABS Warning Light – 8 Diode

Maintain proper trailer anti-lock braking system warning indication with the genuine Truck-Lite 30264Y Amber LED ABS Warning Light.

Part of Truck-Lite's 30 Series, this 2-inch round ABS indicator lamp features 8 LEDs, a distinctive high-profile amber lens, and an ABS marking on the face of the light.

Designed for compatible 12-volt commercial trailer ABS systems, the Truck-Lite 30264Y provides a visible warning when activated by the trailer's anti-lock braking system malfunction indicator circuit.

The lamp features a sealed polycarbonate lens and housing, helping protect its internal electronics from moisture, dirt, road spray, and vibration.

With a low 0.10-amp current draw, solid-state LED construction, and a standard PL-10 two-contact electrical connection, the 30264Y is designed for demanding commercial trailer applications.

Whether you're replacing a damaged ABS warning light, repairing trailer electrical wiring, or maintaining a roll-off trailer's braking system, this Truck-Lite lamp provides a manufacturer-identified replacement for compatible installations.

Truck-Lite Part Number: 30264Y

Store SKU: LT191

Product Series: 30 Series

Light Type: LED ABS Warning / Malfunction Indicator

Color: Amber / Yellow

LED Count: 8

Voltage: 12V DC

Connection: PL-10

IMPORTANT: THIS LISTING INCLUDES ONE SEALED LED ABS WARNING LAMP ONLY. THE MOUNTING GROMMET AND ELECTRICAL PIGTAIL ARE SOLD SEPARATELY.

Features & Benefits

• Genuine Truck-Lite 30264Y: Original Truck-Lite ABS indicator lamp for compatible commercial trailers.

• ABS Marked Lens: Identifies the lamp's intended anti-lock braking system warning function.

• 8-Diode LED Design: Provides amber warning illumination using solid-state LEDs.

• 2" Round Size: Designed for compatible 30 Series round lamp mounting arrangements.

• High-Profile Lens: Raised lens design for improved visibility from appropriate viewing angles.

• 12V DC Operation: Designed for compatible 12-volt trailer electrical and ABS warning circuits.

• Low 0.10A Current Draw: Reduces electrical demand compared with many incandescent warning lamps.

• Sealed Polycarbonate Construction: Helps resist moisture, dirt, and road contaminants.

• Shock and Vibration Resistant: LED construction eliminates fragile incandescent filaments.

• PL-10 Connection: Uses a compatible two-contact electrical plug.

• Grommet Mounting: Compatible with the appropriate 2-inch round mounting grommet.

• Three-Year Supplier-Listed Warranty: Subject to applicable manufacturer warranty terms.

Product Specifications

What Does an ABS Warning Light Do?

ABS stands for Anti-Lock Braking System.

Commercial trailer ABS systems monitor certain braking components and use a warning lamp to indicate a detected malfunction or other operating status according to the system's design.

The Truck-Lite 30264Y is designed to serve as the external amber warning indicator on compatible trailer ABS systems.

When the ABS controller activates the warning circuit, the light illuminates to alert the driver or other personnel to a condition requiring attention.

An illuminated ABS malfunction indicator can mean that the trailer's anti-lock braking function is not operating as intended.

Important: The warning lamp does not diagnose, repair, or control the ABS system. It displays the signal supplied by the trailer's ABS electrical circuit.

8-Diode Amber LED Warning Light

The 30264Y features eight LEDs positioned behind an amber high-profile lens.

Compared with conventional incandescent lighting, LED construction offers:

• Lower electrical current consumption

• No fragile incandescent filaments

• Resistance to normal vibration and shock

• Fast illumination response

• Long-lasting solid-state operation

• Reduced lamp maintenance in compatible applications

The ABS marking on the lens helps distinguish this lamp from ordinary amber trailer marker lights.

High-Profile Lens Design

The Truck-Lite 30264Y uses a raised, high-profile lens design.

This design is related to Truck-Lite's 30 Series high-profile lighting family, which is engineered for improved visibility from appropriate side and front viewing angles.

The lamp has an approximately 2.24-inch outside diameter and 1.50-inch overall depth.

When replacing an existing ABS warning light, confirm that sufficient mounting clearance is available for the high-profile lens.

Sealed Polycarbonate Construction

Commercial trailer lighting is exposed to rain, road salt, dirt, moisture, and vibration.

The Truck-Lite 30264Y features a sealed polycarbonate lens and housing to help protect the internal LED components.

Because this is a sealed lamp, individual LEDs are not designed to be replaced separately.

If the lamp fails, replace the complete assembly.

PL-10 Electrical Connection

The Truck-Lite 30264Y uses a PL-10 two-contact electrical connection.

This is the same general connector family used by several Truck-Lite marker and clearance lamps.

Before ordering, verify that your trailer's existing ABS warning light wiring uses the matching connection.

Important: A compatible electrical plug is required for installation, and the wiring must be connected to the proper ABS warning circuit.

The plug is not included with the individual lamp.

Recommended Mounting Grommet

The Truck-Lite 30264Y is designed for installation using a compatible 2-inch round mounting grommet.

Truck-Lite 30700 — Black PVC 2" Round Open-Back Grommet

This mounting grommet is used with compatible Truck-Lite 30 Series round lamps.

Shop Truck-Lite 30700 2" Round Light Grommet

The grommet is sold separately.

ABS Warning Light vs. Regular Marker Light

Although the Truck-Lite 30264Y resembles an amber marker/clearance light, it is specifically identified for ABS warning applications.

The Truck-Lite 30264Y should be connected according to the trailer ABS manufacturer's instructions, not simply wired into the running-light circuit.

Common Applications

Truck-Lite 30264Y is intended for compatible trailer ABS warning systems, including appropriately equipped:

• Roll-off trailers

• Dump trailers

• Flatbed trailers

• Semi-trailers

• Equipment trailers

• Waste and recycling trailers

• Construction and demolition hauling trailers

Compatibility depends on the trailer's electrical system, ABS controller, mounting configuration, and wiring connections.

When Should You Replace an ABS Warning Light?

Common reasons to inspect or replace the lamp include:

• ABS warning light fails to illuminate during its required system check

• Cracked or damaged lens

• Broken lamp housing

• Corroded electrical connector

• Intermittent warning lamp operation

• Damaged wiring

• Moisture or impact damage

Important: If the ABS warning light stays illuminated, do not assume the lamp itself is defective. The ABS controller may be reporting a genuine braking-system fault.

Inspect and diagnose the ABS system according to the equipment manufacturer's service instructions.

How to Verify the Correct Replacement

1. Confirm the Part Number

Look for Truck-Lite 30264Y on the original lamp or in your trailer's parts documentation.

2. Verify the Warning Function

Confirm that you need an amber ABS warning indicator rather than a standard marker or clearance light.

3. Check the Voltage

The 30264Y is designed for 12V DC operation.

4. Compare the Lamp Dimensions

Verify the original installation accepts a nominal 2-inch round lamp with a 2.24-inch lens diameter.

5. Check the Electrical Connection

Confirm your original lamp uses a compatible PL-10 connection.

6. Inspect the Mounting Grommet

Replace a damaged or worn grommet as needed.

7. Confirm ABS System Compatibility

Verify the warning light is suitable for the trailer's ABS controller and electrical configuration.

Frequently Asked Questions

What is Truck-Lite part number 30264Y?

It is a 2-inch round amber LED ABS warning light in Truck-Lite's 30 Series.

How many LEDs does the lamp have?

Eight.

Is this an LED or incandescent light?

LED.

What voltage does it require?

12V DC.

What is the current draw?

Approximately 0.10 amps.

What are the dimensions?

Approximately 2.24 inches in diameter and 1.50 inches deep.

Does the lens say ABS?

Yes. The lamp features an ABS marking on its face.

What electrical connection does it use?

A PL-10 two-contact connection.

Does the lamp include a mounting grommet?

No. The appropriate grommet is sold separately.

Can this replace a regular amber marker light?

Not automatically. The 30264Y is specifically identified for ABS warning applications. Confirm the required lighting function and electrical compatibility.

Does this light diagnose ABS problems?

No. It illuminates according to the signal supplied by the trailer's ABS system.

What is the store SKU?

LT191.

Order Your Truck-Lite 30264Y LED ABS Warning Light

Maintain proper trailer ABS warning indication with the genuine Truck-Lite 30264Y 2" Round Amber LED ABS Warning Light.

Featuring 8 LEDs, a high-profile ABS-marked amber lens, sealed polycarbonate construction, and a PL-10 electrical connection, this lamp is designed for compatible commercial trailer ABS systems.

Truck-Lite Part #: 30264Y

Store SKU: LT191

2" ROUND AMBER LED ABS WARNING LIGHT

8-DIODE HIGH-PROFILE DESIGN

12V DC — 0.10 AMP

ABS-MARKED LENS — PL-10 CONNECTION

LAMP ONLY — GROMMET AND ELECTRICAL PIGTAIL SOLD SEPARATELY

Order your Truck-Lite 30264Y ABS warning light online today!

Fitment Note: Verify the original part number, ABS system compatibility, voltage, electrical connection, mounting dimensions, and required lamp function before purchasing.

SKU: