American Roll-Off Replacement Cable Sheave – 10" OD x 2½" ID

Replace a worn or damaged cable pulley with this 10-inch outside diameter x 2½-inch inside diameter replacement sheave for compatible American Roll-Off / PALFINGER cable hoist systems.

Designed for applications using 7/8-inch wire rope, this replacement cable sheave helps guide the hoist cable through the pulley arrangement during roll-off container loading and unloading.

With a 10" outside diameter and 2½" center bore, this sheave is intended for compatible roll-off hoist equipment requiring matching pulley dimensions, cable groove specifications, and mounting arrangements.

Whether you're repairing a damaged cable pulley or performing routine equipment maintenance, this replacement sheave offers an option for keeping compatible American Roll-Off equipment in service.

Roll Off Truck & Trailer Parts SKU: CA018G

IMPORTANT: SHEAVE ONLY — MOUNTING PIN, SHAFT, SHEAVE BLOCK, AND INSTALLATION HARDWARE NOT INCLUDED.

Features & Benefits

• American Roll-Off / PALFINGER Application: Replacement sheave for compatible American Roll-Off cable hoist systems.

• 10" Outside Diameter: Designed for equipment requiring a matching 10-inch cable pulley.

• 2½" Inside Diameter: Center bore for compatible 2½-inch mounting shaft arrangements.

• 7/8" Wire Rope Application: Intended for roll-off cable systems using matching 7/8-inch wire rope.

• Individual Replacement Sheave: Replace a worn pulley without purchasing an entire sheave block when the existing components remain serviceable.

• Cable Guidance: Helps guide the wire rope through the hoist system during loading and unloading.

• Commercial Roll-Off Applications: Intended for compatible equipment used in waste hauling, recycling, scrap transportation, and construction.

• Store SKU CA018G: Available online from Roll Off Truck & Trailer Parts.

Product Specifications

Replacement Cable Sheave for American Roll-Off / PALFINGER Hoists

American Roll-Off, part of PALFINGER's commercial container-handling equipment lineup, manufactures heavy-duty cable hoists for roll-off trucks.

These hoists are used in waste collection, recycling, construction debris transportation, and industrial container operations.

Cable sheaves guide the wire rope through the lifting and pulling arrangement as containers are loaded onto and unloaded from the truck.

This 10" OD x 2½" ID replacement cable sheave is intended for compatible American Roll-Off equipment requiring the same dimensions, wire rope size, and mounting configuration.

Common applications include:

• American Roll-Off cable hoists

• PALFINGER American Roll-Off-equipped trucks

• Commercial roll-off dumpster transportation

• Construction and demolition debris hauling

• Waste collection and recycling operations

• Scrap metal and industrial container handling

• Roll-off hoist maintenance and repair

Important: American Roll-Off manufactures multiple cable hoist configurations. Not all models use the same sheave diameter, bore size, or mounting arrangement.

Related Replacement Part References

This product uses the same store SKU, CA018G, as our replacement sheaves marketed for other roll-off equipment applications.

Related references from those listings include:

These are cross-references associated with the CA018G replacement sheave. They are not presented as original American Roll-Off part numbers.

Confirm the physical dimensions and mounting configuration before treating any cross-reference as an interchangeable replacement.

Why Replace a Worn Roll-Off Cable Sheave?

Cable sheaves operate under repeated rotation, cable contact, and heavy working loads.

Over time, wear can develop in the cable groove, center bore, and rotating contact surfaces.

Common warning signs include:

• Excessive or uneven wear in the cable groove

• Cracked or damaged sheave flanges

• Binding or restricted pulley rotation

• Excessive movement around the mounting shaft

• Worn center bore or bearing surfaces

• Abnormal cable tracking

• Premature wire rope wear

• Visible corrosion or other damage

Replacing a worn or damaged cable sheave can help maintain proper wire rope guidance and reduce unnecessary wear on related hoist components.

Always inspect the wire rope, mounting shaft, retainers, and surrounding parts when replacing a cable sheave.

How to Verify the Correct Replacement Sheave

Before ordering, compare this sheave with the pulley currently installed on your American Roll-Off equipment.

1. Outside Diameter

Measure across the outside edges of the sheave. This replacement has a 10-inch outside diameter.

2. Inside Diameter

Measure the finished center bore. This replacement has a 2½-inch inside diameter.

3. Wire Rope Size

Confirm your equipment uses 7/8-inch wire rope.

4. Cable Groove

Compare the groove width, depth, and profile with your existing sheave.

5. Overall Sheave Width

Verify the replacement will fit within the available space between mounting plates.

6. Mounting Shaft

Confirm the required pin or shaft diameter, spacers, retaining hardware, and mounting configuration.

7. Equipment Compatibility

Check your American Roll-Off hoist model and parts documentation to determine whether this sheave matches the required dimensions.

Important: A 10-inch sheave with a 2-inch or 3-inch bore is not a direct substitute for this 2½-inch-bore sheave.

Frequently Asked Questions

What size is this American Roll-Off replacement cable sheave?

This sheave measures 10 inches in outside diameter with a 2½-inch inside diameter.

What size cable does it use?

It is intended for 7/8-inch wire rope.

Will this fit my PALFINGER American Roll-Off hoist?

It may fit compatible American Roll-Off hoists requiring a 10" OD x 2½" ID cable sheave for 7/8" wire rope. Verify the original dimensions, groove, and mounting arrangement before ordering.

Does this sheave include the mounting pin?

No. This listing includes the replacement sheave only. Mounting pins, shafts, retainers, and installation hardware are not included.

Is this a complete cable sheave block assembly?

No. This product is one individual replacement sheave.

Is this the same as your American Roll-Off 10" sheave with a 2" bore?

No. The 2-inch-bore sheave is a different size. This product has a 2½-inch bore.

Is this an original PALFINGER-manufactured part?

This product is offered as a replacement for compatible American Roll-Off / PALFINGER equipment. The equipment brand does not establish the manufacturer of the supplied replacement part.

What is the store SKU?

The Roll Off Truck & Trailer Parts SKU is CA018G.

Order Your American Roll-Off Replacement Cable Sheave

Keep your roll-off equipment operating with replacement cable sheaves, pulleys, and hoist components from Roll Off Truck & Trailer Parts.

This 10" OD x 2½" ID replacement cable sheave (SKU CA018G) provides an option for compatible American Roll-Off / PALFINGER cable hoist systems using 7/8-inch wire rope.

Order your American Roll-Off replacement cable sheave online today!

SHEAVE ONLY — MOUNTING PIN, SHAFT, AND HARDWARE NOT INCLUDED.

Fitment Note: American Roll-Off / PALFINGER identifies the intended equipment application. Verify the original sheave dimensions, cable groove, overall width, and mounting arrangement before purchasing.

SKU: